Our review of the Powerbomb dirt bike exhaust from Fmf

Our review of the Powerbomb dirt bike exhaust from Fmf

If you're looking to update or swap the exhaust on your dirt bike, then you could be going through it for a number of reasons: make improvements to performance, save weight, much better appearance, or perhaps far better sound as you are ripping around. No matter what the justification you are in the market, we feel that you will want to study this specific writeup on the Powerbomb exhaust system from Fmf before you make up your mind in regards to what system to select.

Swapping out the stock exhaust on your dirt bike is just about the most popular aftermarket enhancements. We'll explain how if you're seeking the maximum overall performance enhancement, then you'll need to look into obtaining a complete system. They'll be made of lighter weight materials so they really help save weight, and they will frequently will need some sort of ECU upgrade such as a Power Commander to achieve the most from them.

When you're after a better sounding exhaust than the restrictive setup that was installed from the factory on your dirt bike, then the Powerbomb from Fmf will probably be very good alternative. Bike suppliers are forced to control the sound an exhaust gives off, but in doing so they take away from the raw appeal of the powerplant fitted in your dirt bike. The Powerbomb can assist address this limitation.

All right, now that you've got a broad introduction about what you should take into consideration when you find yourself shopping for a brand new exhaust system for your dirt bike, we should get into some specifications on the Powerbomb from Fmf:

These Powerbomb Headers utilize FMF�s patented module precisely located at the initial stage of the header for specific applications. The position �Bomb� increases performance and horsepower is increased as much as 10%. They act as �pre-muffler� helping to lower the decibel output and the expansion and contraction of exhaust sonics through the system causes increased flow. They are available in stainless steel for strength combined with light weight and in titanium for even greater weight savings. Select applications available in SX version that is designed for more low to mid-range power and an MX version that is focused in the mid-to-upper rpm range.

So there you have it; this useful article on Fmf's Powerbomb exhaust. As you can tell, it offers truly an impressive range of attributes and specifications. If you're considering a brand new exhaust system then you will want to choose the Powerbomb here or here and get out there and ride and enjoy!